Wincor Nixdorf TH180, Programmer'S Manual

Page: 47 / 162

TH180 Programmer’s Guide
42
ESC { n
[Designation] Turn upside-down printing mode on/off
[Format] 1BH, 7BH, n
[Valid limits] 0 n 255
[Initial value] n = 0
[Function] (1) Specifies or cancels inverted printing.
(2) Each bit of parameter n is defined as listed below.
Bit Function
Value
0 1
0 Upside-down printing Cancel Specify
1 To be defined
2 To be defined
3 To be defined
4 To be defined
5 To be defined
6 To be defined
7 To be defined
(3) For parameter n, only the lowest-order bit is valid.
(4) When standard mode is selected, this command is valid only when entered at the beginning
of a line.
(5) When page mode is selected, entering this command only manipulates the internal flags of
the printer.
(6) The setting of this command has no effect in page mode.
(7) In inverted printing, characters are printed upside down. However, the sequence of print
lines is not inverted.
[Normal printing] [Upside-down printing]