Wincor Nixdorf TH180, Programmer'S Manual

Page: 83 / 162

TH180 Programmer’s Guide
78
If data is present in the print buffer, the data subsequent to parameter m is
processed as normal data.
e. When bar code printing is finished, the beginning of the new line is set as
the next print position.
f. Except for inverted printing, this command does not affect the print modes
(emphasized printing, double-strike printing, underlining, and character
size).
(8) For page mode
a. The bar code is only expanded. It is not printed. When bar code expansion is
finished, the next dot of the final data of the bar code is set as the next data
expansion start position.
b. If parameter d is outside the definition area, command processing is
canceled. From the next data, the data is processed as normal data. The
data expansion start position is not moved.
c. If the horizontal width of the bar code exceeds the print area of one line, the
data expansion start position is moved to the left end outside the print area.
The bar code is not printed.
(9) This command is ignored if:
a. The bar code data contains an undefined code.