Mensor/WIKA Operating Instructions Series CPG 2500
15
Digital Pressure Gauge
SERIES CPG 2500
3.5 Chassis Assembly
The chassis assembly acts as the housing for the system. The system has no user-
serviceable parts except for the fuse, and therefore the chassis should not be opened
except by qualified repair personnel at Mensor or certified service locations for any
other reason.
3.6 Turning on the CPG 2500
You can confirm that your CPG 2500 is operational right now. Apply power to the power
connector on the rear of the instrument with the included power adapter, remove any
plastic plugs from the rear panel pressure ports, and press the power switch to ON. The
system will go through an initialization process and then a display will appear similar to
the screen shown below.
Touch the Contact and Version Information key on the toolbar and a window will appear
listing the Mensor customer service contact and software version information. Press the
back key to return to the main screen.
Summary of Contents for SERIES CPG 2500
Page 87: ......
