WIKA SERIES CPG 2500, Operating Instructions Manual

Page: 49 / 88

Mensor/WIKA Operating Instructions Series CPG 2500 49
Digital Pressure Gauge
SERIES CPG 2500
KEYLOCK Keylock sp <value>
lf Invoking the KEYLOCK command makes the front
panel keys inoperative. Where <value> is 1 to lock
out the front panel keys, 0 to enable front panel
key functions.
LINEREV not emulated
MODEL? model?lf This query returns the CPG 2500 model number.
OPT? opt?lf Returns the type of any installed options for the
CPG 2500.
OUTFORM outform sp <value>
lf The OUTFORM command sets a particular output
format as shown below. This command affects
only the remote return string; it has no effect on
the front panel display.
Where <value> is:
0: Returns pressure, rate, or peak values in fixed
decimal format, which is the default format.
1: Returns pressure and temperature data in
counts for factory use.
2: Returns output pressure, pressure rate, or peak
values.
Use the SAVE command to retain the latest OUT-
FORM configuration.
RANGENEG? rangeneg?lf This query will return the lower range of the active
channel.
RANGEPOS? rangepos?lf Returns the upper range of the active channel.
RFILTER rfilter sp lf Sets the percentage of exponential filtering ap-
plied to the pressure rate reading. Where <value>
is a value from 0 to 99.99 (percent of FS).
RFILTER? rfilter?lf Returns the percentage of exponential filtering ap-
plied to the pressure rate reading.
RWINDOW rwindow sp <val-
ue> lf Sets the pressure rate filter window.
Where <value> is a value in the current units
within the range of the instrument.
RWINDOW? rwindow?lf The rwindow query returns the pressure rate filter
window setting. The DPG returns <value><cr><lf>
where <value> is a value in the current units within
its range.