14
Mensor/WIKA Operating Instructions Series CPG 2500
Digital Pressure Gauge
SERIES CPG 2500
3.3 Front Panel
The CPG 2500 front panel includes a 6.2 inch color Half Video Graphics Array (HVGA)
liquid crystal display featuring touch screen technology. Operator input is accomplished
by pressing the words or icons presented on the display. There are no discrete keypads
or switches on the front panel.
On the lower right hand side of the front panel there are labels which show the model
number, serial number, and calibrated pressure ranges of the internal transducers.
3.4 Display
When the CPG 2500 is powered up it takes about one minute to initialize, then displays
a screen similar to the one shown in “6.3 - Display Screen Features”. The display is
made up of rectangles that display text or icons.
Keys, Tabs, Labels and Windows:
In this manual a key is a small rectangle which
acts as a switch when pressed. Keys have borders with a three dimensional, shadowed
effect. Tabs are a group of touch points, each of which will overlay most of the screen
with one page related to its title subject. Small rectangles with double line borders that
display information, but do not respond to being touched, are called Labels or Win-
dows.
Keys cause something to change when they are touched. Each key has a character-
istic response when actuated; either an instant, single step response when the key is
pressed, or a delayed response when released. Operators will quickly become accus-
tomed to the particular characteristics of the frequently used keys. Some keys become
labels under certain conditions, then resume their key function in other circumstances.
Main Screen:
The main screen appears after power-up. This screen contains the chan-
nel frames and toolbar.
Channel Frame(s):
The channel frames contain information specific to a channel. The
channel frames are color coded with channel A being green and channel B being blue.
The Delta channel is yellow. If only one channel is installed, a wide frame will be dis-
played in the color of the channel selected. The channel frame contains the channel
setup key (wrench icon), the channel title bar, the calibration function key (if enabled),
the engineering units key, the pressure reading window, and the display function win-
dows/keys (if enabled).
Toolbar Keys:
The toolbar at the bottom of the screen has the Contacts and Version
Information key (brings up a corporate information display), the language selection key,
the main screen view key, the remote setup key, and the remote status key.
Summary of Contents for SERIES CPG 2500
Page 87: ......
