Configuration of gateways with samosPLAN
6
Wieland Electric GmbH | BA000970 | 07/2019 [9855]
48
Open the
Properties
docking window.
If you wish to change the tag name of the byte:
Overwrite the pre-allocated tag name of the byte with the desired new value in the configurati-
on dialog.
If you also want to change the tag names of individual bits:
Overwrite the pre-allocated values with the desired new value under
Parameters
in the confi-
guration dialog.
In the
Logic
view, these bits will appear with the corresponding tag names.
Configuring additional direct gateway output values
You can add new output values (bytes) in addition to the pre-allocated output values in the
Gate-
way
view.
Click on an empty byte in the
Gateway
view.
Open the
Properties
docking window and assign a tag name for the byte in the configuration
dialog.
⇨
Tag names for all bits are automatically pre-allocated under
Parameters
.
