Thank you
for choosing a Wieland Technik AGC MicroVision unit. This unit guarantees you the best
results more often and gives you the quality of the original dental electroforming system. You also get
excellent service and support from the leading supplier of dental electroforming systems.
Please take some time to carefully read through these instructions before using the unit. This will help
avoid incorrect operation, which could lead to unsatisfactory end results.
If you have any further questions after reading these instructions, please get in touch with us.
Wieland Technik GmbH & Co. KG
Lindenstraße 2, 75175 Pforzheim, Germany
Fon +49 72 31 / 37 05 - 0
Fax +49 72 31 / 35 79 59
www. wieland-dental.de
[email protected]
The AGC process has been successfully used for prosthetic restorations since 1986. It is regarded today
as one of the most proven and forward-looking technologies for producing high quality dental restora-
tions. From the time it was first developed, the process has been constantly monitored in scientific stu-
dies by leading universities. A large number of independent publications confirm the excellent clinical
prognosis of restorations made with this method.
Wieland Technik was the first manufacturer anywhere in the world to make it possible for
electroformed frameworks veneered with ceramic or composite materials to be produced in the dental
laboratory. Our equipment technology has been greatly enhanced in the last few years, which has
resulted in a whole range of equipment ideally suited to any requirement. The operation of the
equipment and the co-ordination of all system components involved in producing an AGC crown have
been perfected to such a degree that the quality of results obtained and the range of indications
covered are virtually impossible to achieve with any other technology.
Because we do our own research and development, and produce most of the equipment and electro-
lytes in-house, we can guarantee that the system will continue to meet future market demands as it is
developed further. Your decision to purchase this Wieland Technik AGC unit ensures that you
will benefit from the proven knowledge and efficiency of the most experienced manufacturer in dental
electroforming and from the scientifically proven and outstanding clinical results of the AGC electrofor-
ming technique.
The AGC MicroVision was specially developed for use with the AGC MicroVision goldplating bath
(CE-0483).
Only in this combination do we only guarantee the compliance with the basic requirement of Annex I,
EC Medical Directive 93/42 EEC.
2
Introduction
