2. Electroforming
11
The display shows the current temperature of the gold-
plating bath during the heating phase.
Electroforming is started automatically when the required
temperature of 58 °C is reached.
Up until the electroforming process starts you can inter-
rupt the program by pressing the
"Cancel"
button. This
applies to all menus with a cancel button.
The message "Are you sure you want to cancel?"
appears in a Warning menu. Press the
"Yes"
button to
return to the main menu. All settings are automatically
deleted.
However, if you press the
"No"
button you will return to
the previous menu.
2.4.5. Electroforming in progress
The remaining run time is displayed in minutes.
Press the
"Overview"
button to view the parameters
selected in table form.
Press the
"Back" button to return to the
"Electroforming in progress" menu
.
In the
"Overview"
screen the process can be aborted by
pressing the
"Cancel"
button.
e
n
g
li
sh
