e
n
g
li
sh
15
3. Electroforming bars
Ensure that the surfaces of the magnetic contacts in
the electroforming head and on the contact rods
and the reference piece are clean and free of dust.
If necessary, degrease the surfaces using AGC
degreaser.
Press the button corresponding to the particular position
to enter the parameters for the parts to be electroformed.
The
"BAR"
button is only available on positions 6, 7
and 8.
Select a position and enter the parameters:
Press the
"BAR"
button to select the bar and the
required plating thickness.
If you do not enter
a thickness the unit will set a
default thickness of 0.2 mm.
The
"Not used"
button indicates a position where no
object is connected and the position is considered not
assigned.
Press the
"BAR"
button to call up the bar information
menu.
More information is listed here.
Press the
"Back"
button to return to the previous menu
"Tooth type + layering thickness". Press the
"Continue"
button to call up the "Bar-surface-weight" menu.
Important:
!
