030-300408 Rev. B
83
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
13.5.2 DHCP Configuration (Private LAN)
The following settings will be displayed if you select
DHCP
from the
Advanced LAN
menu.
DHCP Server
This setting allows VersaLink to automatically assign IP addresses to local
devices connected on the LAN. Westell advises setting this to enabled for the
private LAN.
Off = DHCP Server is disabled
Private LAN = DHCP addresses will be saved into the Private LAN
configuration.
Public LAN = DHCP addresses will be saved into the Public LAN
configuration. This option is only available if the Public LAN DHCP server is
enabled.
NOTE: These addresses will be overwritten if the Internet Service Provider
supports dynamic setting of these values.
DHCP Start Address
Factory Default = 192.168.1.15
This field displays the first IP address that the DHCP server will provide. The
DHCP Start Address must be within the IP address and lower than the DHCP
End Address. You may use any number from 0 to 254 in this address.
DHCP End Address
Factory Default = 192.168.1.47
This field displays the last IP address that the DHCP server will provide. The
DHCP End Address must be within the IP address and higher than the DHCP
Start Address. You may use any number from 0 to 254 in this address.
