030-300408 Rev. B
177
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
S
Single Static IP
This page contains the settings that would allow the PPP address received from the network to be propagated to a
single LAN device behind the modem.
Single Static IP
WAN IP Address
This is the PPP IP address the ISP has assigned the modem.
Selection box
This box contains the devices available to share the Single Static IP address the ISP
has assigned the modem. The names listed in the select box will be populated by
VersaLink’s DHCP server based on DHCP requests. If a device’s name cannot be
determined, the current IP address of the device will be placed in the list.
When the feature is enabled, the active machine will be highlighted in the select box
and be displayed at the bottom of the page with the “disable” button.
When the feature is disabled, no device in the select box will be highlighted and the
“enable” button will be available.
When the “User Configured PC” is selected, a local PC must be configured manually
with the WAN IP address as its Ethernet adapter’s address.
T
Trace Route
The Trace feature allows you to perform an IP trace route to a remote computer either within or beyond the Internet
service provider’s network. Enter either the IP address or the hostname of the remote host computer into the input
box to the right of the Trace button. If you trace by name, DNS will be used to look up the appropriate IP address for
that name.
Trace
Success
Trace will display its progress in the text box. Trace will show three round trip
times and the DNS name (if available) of each intermediate VersaLink.
Failure
Trace will display “*” when it does not receive a response or cannot determine
the DNS name of an intermediate Gateway. This is not necessarily an error, as
some Gateways are configured to ignore trace route packets or do not have DNS
name.
