030-300408 Rev. B
123
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
13.6.8 Route
The following settings will be displayed if you select
Route
from the
Advanced WAN
menu. The Route table
maintains the routes or paths of where specific types of data shall be routed across a network.
Note: In this screen, VersaLink represents ‘Gateway.’
To add a Route, enter a
Subnet Mask
address, or check the
Host Route
box. Click on the
add
button to establish a
static route.
IP Interfaces
IP Interfaces
The list of active interfaces on the modem and their IP and Subnet mask address.
Eth0 is the local LAN interface.
Lo0 is the loopback interface.
Address
The IP interface address.
Subnet Mask
The IP interface subnet address.
Name
The IP interface device name.
Network Routing Table
Network Routing Table
The list of network routes. These can be either routes for directly connected
interfaces or static routes.
Destination Address
The IP address or subnet of the Route.
Subnet Mask
If the Route is a network route, Subnet Mask is used to specify the subnet address.
If the Route is a Host route, then the Host Route check box is used.
VersaLink
Indicates were to send the packet if it matches this route.
