030-300408 Rev. B
71
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
If you select
Edit
from the
Security Level
screen, the
User Defined Firewall Rules
screen will be displayed. This
screen allows you to change the security parameters on your Inbound and Outbound Firewall rules via the
User
Defined Firewall Rules
drop-down arrow. If you select
Inbound
, this will restrict inbound traffic from the WAN to
the LAN.
Outbound
restricts outbound traffic to the WAN from the LAN. To apply the new settings, click
Apply
in
the
screen labeled
User Defined Firewall Rules
.
NOTE
: Westell recommends that you do not change the settings in the
User Defined Firewall Rules
screen. If you
need to reset VersaLink to factory default settings, push the reset button on the rear of VersaLink.
The information displayed in the following screen depends upon the Firewall security setting you have selected. If
you selected “None” in the preceding Firewall
Security Level
screen, no values will be displayed in the following
User Defined Firewall Rules
screen.
If you clicked
Apply
in the
User Define Firewall Rules
screen, the following pop-up screen will be displayed.
Click on
OK
if you want your new firewall setting to take effect. If you click
Cancel
, your new firewall settings will
not take effect.
Note: The information displayed in this screen
depends on the level of security you have selected.
