030-300408 Rev. B
43
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
Select the Ethernet Configuration
After clicking on
OK
in the preceding screen, the
Network
screen will be displayed. The
Network
screen shows the
settings for the newly created location. From the
Configure
field in the
Network
screen, select
Built-in Ethernet
.
Click on
Save
.
NOTE: Default settings for the Built-in Ethernet configuration are sufficient to operate VersaLink.
Check the IP Connection
To verify that the computer is communicating with VersaLink, follow the instructions below.
1. Go to the “
Apple
” icon in the upper-right corner of the screen and select
System Preferences
.
2. From
the
System Preferences screen
, click on the
Network
icon. The
Network
screen will be displayed.
3. From
the
Configure
field in the
Network
screen, select
Built-in Ethernet
.
4. View the IP address field. An IP address that begins with
192.168.1
should be displayed.
NOTE: The DHCP server provides this IP address. If this IP address is not displayed, check VersaLink’s wiring
connection to the PC. If necessary, refer to section 5 for hardware installation instructions.
