030-300408 Rev. B
132
August 2005
VersaLink™ Gateway (Model 327W)
User Guide
14.6 Enabling Static NAT
Before you enable static NAT, you must select
Default
from the
Current Profile
drop-down box. Static NAT must
be configured for the Gateway’s default account profile. After you select the default profile, click the
static NAT
button.
NOTE: In the following screen, the default account profile is labeled
Default
. However, if you have renamed the
default account profile, you must select the profile name you created as the default profile.
If you click on the
static NAT
button in the
Service Configuration
screen, the following screen will be displayed.
Select your device from the
Static NAT Device
drop-down arrow, or type the IP address of the device in the field
labeled
IP Address
. Click on
enable
. This will automatically enable the Static NAT feature for that device.
