Welch Allyn RetinaVue 700, Directions For Use Manual

Page: 132 / 158

The RetinaVue 700 Imager has been tested to verify that it is compatible with
the approved cleaning agents.
Cleaning the RetinaVue 700 Imager lens
Wipe the surface of the lens with a cleaning cloth or a lens cleaning tissue such
as Thorlabs Inc.. Avoid touching the lens except when cleaning is required.
Cleaning the RetinaVue 700 Imager and face cup
Power off the RetinaVue 700 Imager before cleaning it.
Use a pre-moistened wipe or soft cloth slightly moistened with an approved
cleaner to gently clean the RetinaVue 700 Imager and face cup.
Cleaning the battery charger
Use a pre-moistened wipe or soft cloth slightly moistened with an approved
cleaner to gently clean the battery charger.
Disinfecting the RetinaVue 700 Imager, face cup, and battery charger
Note Disinfect according to your facility's protocols and
standards or local regulations.
Use a pre-moistened wipe or soft cloth slightly moistened with an approved
disinfectant to disinfect the RetinaVue 700 Imager, face cup, and battery
charger. Follow the manufacturers recommendations.
Approved cleaning agents
Use only the following approved cleaning agents on the RetinaVue 700 Imager,
face cup, and battery charger:
•
70 percent isopropyl alcohol
• CaviWipes
•
Sani-Cloth
®
Plus
•
Super Sani-Cloth
®
The RetinaVue 700 Imager has been tested to verify these instructions as being
capable of preparing the RetinaVue 700 Imager for re-use. You must ensure that
cleaning and disinfection as actually performed by your personnel, with your
equipment and materials, achieves the desired result. This may require validation
and routine monitoring of your actual process.
128 Maintenance Welch Allyn RetinaVue™ 700 Imager