Welch Allyn RetinaVue 700, Directions For Use Manual

Page: 146 / 158

EMC compliance
Special precautions concerning electromagnetic compatibility (EMC) must be
taken for all medical electrical equipment. This device complies with IEC
60601-1-2 : 2014 (EN 60601-1-2 : 2015).
•
All medical electrical equipment must be installed and put into service in
accordance with the EMC information provided in this
Directions for use.
• Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The device complies with all applicable and required standards for
electromagnetic interference.
•
It does not normally affect nearby equipment and devices.
• It is not normally affected by nearby equipment and devices.
• However, it is good practice to avoid using the device in extremely close
proximity to other equipment.
• It is not safe to operate the device in the presence of high-frequency surgical
equipment.
WARNING The use of the device adjacent to or
stacked with other equipment or medical electrical
systems should be avoided because it could result
in improper operation. If such use is necessary, the
device and other equipment should be observed to
verify that they are operating normally.
WARNING Use only Accessories recommended
by Welch Allyn for use with the device.
Accessories not recommend by Welch Allyn may
affect the EMC emissions or immunity.
WARNING
Maintain minimum separation distance
between the device and portable RF
communication equipment. Performance of the
device may be degraded if proper distance is not
maintained.
Emissions and immunity information
142 General compliance and standards Welch Allyn RetinaVue™ 700 Imager