Welch Allyn RetinaVue 700, Directions For Use Manual

Page: 100 / 158

Note (In this example, "DATA (E:)".)
Note
Use a safe eject method when ejecting the RetinaVue
700 Imager to ensure a complete software transfer to
the RetinaVue 700 Imager . (Options include right-
clicking on the
Start Menu > Open File Explorer> right-
click on EXAM , click Eject . Or, click on the Taskbar>
Show hidden icons > click Safely Remove Hardware and
Eject Media> click Eject RetinaVue Imager .
If an eject menu is not available with your
system settings, wait until the files have
completely copied before manually ejecting
the RetinaVue 700 Imager .
10. Remove the USB cable from the RetinaVue 700 Imager.
11. Touch OK at the prompt: " Would you like to install the new version of
software you just loaded to the device? "
Note The update process typically takes a few minutes to
cycle through the complete update. During the update
process, it is normal to see a process update icon
that appears while the RetinaVue 700 Imager update
successfully completes.
12. Touch OK at the prompt: " Successful update. Touch OK to restart device. "
13. After the RetinaVue 700 Imager boots up to the main Patients screen, confirm
the software update.
a. From the main Patients screen , touch .
b. Touch Settings .
c. Touch About to view the software version.
14. Touch (Back) to return to the Settings screen.
Troubleshooting software updates
96 Using the RetinaVue 700 Imager Welch Allyn RetinaVue™ 700 Imager