Welbilt Convotherm OES 6.10 Mini Operating Manual Download Page 30

Page: 30 / 359

3.6

Hazards and Safety Measures During Cleaning

Safety hazard: cleaning agents

When cleaning the unit, keep the following hazards in mind and take the actions required in order to

eliminate and/or minimize these hazards:

Risk / hazard

Where and in which situa‐

tions will the risk/hazard ex‐

ist?

What to do

Safety device

Skin, eye, and respira‐

tory tract irritation haz‐

ard as a result of con‐

tact with cleaning

agents and their vapors

During fully automatic clean‐

ing: In front of the unit door

Do not open the unit door

during the fully automatic

oven cleaning process

None

During all cleaning tasks

■

Do not let your eyes or

skin come into contact

with cleaning agents

■

Do not heat up the unit

when there are cleaning

agents in it. Doing so is

only permitted when run‐

ning the semi-automatic

or fully automatic clean‐

ing process under super‐

vision.

■

Do not spray cleaning

agents into the unit until

prompted to do so by the

software or unless the

oven temperature is

equal to or lower than

140°F

■

Do not inhale the spray

mist

■

Wear the required per‐

sonal protective equip‐

ment

None

Whenever handling the

cleaning agent canisters

Wear the required personal

protective equipment

None

Whenever using aggressive

cleaning agents

Only use the cleaning

agents specified under

'Cleaning Agents' on page

124

None

3 For Your Safety

Operating Manual

Summary of Contents for Convotherm OES 6.10 Mini








































































































































































































































































































































































Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands

Welbilt Convotherm OES 6.10 Mini, Operating Manual

Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands