8.4 Removing and installing racks
For your safety when working with/on the combi oven
Before starting work, read and understand the rules, risks, and hazards specified in Safely Using the
Unit on page 109 and follow all the corresponding instructions without exception.
Removing racks
Follow the steps below to remove a rack:
Step
Procedure
Figure
1
Push the rack upwards (1) and lift it over the holders
(2).
2
Swing the rack towards the inside of the oven cavity at
a slight angle (3) and then remove it from the oven (4).
Caution:
Make sure not to bend the rails, as the rack will no lon‐
ger hold oven racks, sheet pans, and bakeware safely
in place otherwise.
3
Push the air distributor upwards (5).
4
Swing the air distributor backwards (6) and disconnect
the rack from the air distributor.
8 How to do it right
Operating Manual
113
Summary of Contents for Convotherm OES 6.10 Mini
