Welbilt Convotherm OES 6.10 Mini Operating Manual Download Page 140

Page: 140 / 359

Step

Procedure

Button

Turn the rotary nozzle on the oven cavity's top panel once

to make sure it moves freely.

Close the unit door.

Result:

The combi oven will start the fully automatic cleaning cycle.

Warning:

Do not, under any circumstance, interrupt the cycle. Do not

open the unit door.

Wait until an acoustic signal is emitted at the end of the

cleaning process.

After the system's prompt, confirm the end of the fully auto‐

matic cleaning process.

Open the unit door and check to make sure that everything

has been cleaned properly.

If necessary, clean the oven drain.

Turn the combi oven off and leave the unit door ajar in or‐

der to let the oven cavity dry out.

Follow-up oven cleaning

If the unit is very heavily soiled, it is recommended to follow up with a semi-automatic cleaning cycle

and take care of any remaining spots in a targeted manner.

Possible fault events

The following table lists the various possible fault events and how to deal with them:

Fault event

What you should do

'Not enough water' is displayed

Check the water connection.

'Check cleaning agent fill level and check the

supply hoses for kinks and confirm' is displayed

Check which one of the cleaning agent canisters

is no longer sufficiently full and top it off.

Check whether the supply hoses are kinked at

any point and correct the problem.

Power outage

If cleaning agent has already been applied inside

the oven, the combi oven will run an automatic

safety rinsing cycle for safety purposes. It will not

be possible to operate the combi oven until after

this cycle is done.

You interrupted the automatic cleaning cycle

For more information...

Related subjects

Replacing the cleaning agent canister containing ConvoClean forte

145

Replacing cleaning agent canisters with ConvoCare

146

Cleaning schedule

122

Cleaning agents

124

9 Cleaning and maintenance

Operating Manual

140

Summary of Contents for Convotherm OES 6.10 Mini








































































































































































































































































































































































Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands

Welbilt Convotherm OES 6.10 Mini, Operating Manual

Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands