Welbilt Convotherm OES 6.10 Mini Operating Manual Download Page 117

Page: 117 / 359

Step

Procedure

Figure

Push the air distributor upwards (7).

Swing the air distributor backwards (8) and disconnect

the rack from the air distributor.

Installing racks

Follow the steps below to install the racks:

Step

Procedure

Follow the same steps used to remove the racks, but in opposite order.

Check to make sure that the racks have been installed properly.

Check to make sure that the sheet pans can be easily slid in.

This makes it possible to ensure that you did not mix up the two racks.

8 How to do it right

Operating Manual

117

Summary of Contents for Convotherm OES 6.10 Mini








































































































































































































































































































































































Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands

Welbilt Convotherm OES 6.10 Mini, Operating Manual

Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands