manualshive.com logo in svg

Welbilt Convotherm OES 6.10 Mini, Operating Manual

Share
Download
Welbilt Convotherm OES 6.10 Mini Operating Manual Download Page 321

9.2.10  Cleaning the oven cavity behind the suction panel

For your safety when cleaning

Before starting any cleaning work, familiarize yourself with the rules, risks, and hazards specified in

Working Safely When Cleaning on page 123 and follow all the corresponding instructions without ex‐

ception.

Required tools

You will need the following tools:

■

ConvoClean new or ConvoClean forte cleaning agent in the spray bottle

Using the spray bottle

Observe the following when using the spray bottle:

■

Never leave the spray bottle pressurized for an extended period of time if you are not using it.

Slowly open the pump head so that the compressed air can escape.

■

Rinse the spray bottle weekly.

■

Rinse the nozzle, the nozzle extension, and the nozzle fitting after every use.

Cleaning the oven cavity behind the suction panel

Follow the steps below to clean the area behind the suction panel:

Step

Procedure

Figure

1

Remove the racks and the suction panel.

2

Use the spray bottle to spray ConvoClean new or Con‐

voClean forte onto the suction panel and the rear area

of the oven cavity.

3

Let the sprayed ConvoClean new or ConvoClean forte

sit for 10 to 20 minutes.

4

Thoroughly rinse the oven cavity and the suction panel

with a water jet.

or:

Thoroughly rinse the oven cavity and the accessories

with plenty of water and wipe them clean with a soft

cloth.

You can repeat the cleaning sequence if there is heavy

soiling.

5

Leave the unit door ajar in order to let the oven cavity

dry out.

9 Cleaning and maintenance

Operating Manual

140

Summary of Contents for Convotherm OES 6.10 Mini








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands