Welbilt Convotherm OES 6.10 Mini, Operating Manual

Page: 333 / 359

The oven light's parts and what they do
Following is an explanation of what the oven light's parts do:
No. Designation Function
1
Countersunk screw Fastener used to secure the oven light's cover
2
Bezel Allows access to the halogen lamp
3
Glass pane Protects the halogen lamp from moisture
4
Seal Seals off the oven light area
5
Oven wall Mounting surface for the oven light
6
12-V halogen lamp Light source
7
Button screws Fasteners for the halogen lamp socket
8
Lamp socket Holds the halogen lamp
9
Reflector housing
■
Holds the mounted halogen lamp
■
Reflects light
Spare parts included
Following are the spare parts required:
■
Halogen lamp 12 V
■
Seal
Required tools
You will need the following tools:
■
Phillips screwdriver
■
Allen key
■
Hex socket driver
■
Clean, soft cloth or glove for handling the halogen lamp
■
Covering material for the bottom of the oven cavity (e.g., cloth)
Handling the halogen lamp
Always wear gloves when grabbing halogen lamps (alternatively, you can use a cloth). Do not touch
the bulb in new halogen lamps, or halogen lamps that you will be reusing, with your bare fingers.
If the halogen lamp cannot be removed completely, e.g., the terminals are stuck, contact a service
technician immediately.
Prerequisites
Check whether the following prerequisites are met:
■
The combi oven has been de-energized and locked and tagged out.
■
The oven cavity must have cooled down to a temperature of less than 140°F since the last time it
was used.
■
The rack must have been removed.
■
The bottom of the oven cavity is covered in order to protect it from scratching by falling parts.
■
The halogen lamp is not lit up and has already cooled down.
■
The new, enclosed seal has been inspected for damage and is not damaged.
9 Cleaning and maintenance
Operating Manual 152