Welbilt Convotherm OES 6.10 Mini Operating Manual Download Page 116

Page: 116 / 359

8.4 Removing and installing racks

For your safety when working with/on the combi oven

Before starting work, read and understand the rules, risks, and hazards specified in Safely Using the

Unit on page 112 and follow all the corresponding instructions without exception.

Removing racks

Follow the steps below to remove a rack:

Step

Procedure

Figure

Slightly lift the rack at the front (1) and then lift it over

the front holder (2).

Slightly pull the rack forward (3) and then lift it over the

rear holder (4).

Swing the rack towards the inside of the oven cavity at

a slight angle (5) and then remove it from the oven (6).

Caution:

Make sure not to bend the rails, as the rack will no lon‐

ger hold oven racks, sheet pans, and bakeware safely

in place otherwise.

8 How to do it right

Operating Manual

116

Summary of Contents for Convotherm OES 6.10 Mini








































































































































































































































































































































































Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Brands by name

Popular brands

Welbilt Convotherm OES 6.10 Mini, Operating Manual

Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Brands by name

Popular brands