©
2019 WEINZIERL ENGINEERING GmbH
Page 8/41
The following object is available for switching the dimmer, if it
has been activated in the parameters:
Group Object
Type KNX
Size
Direction
GO 21 RGB A: Color on/off - Switch
1.001
1 Bit
From KNX
Behavior on ON telegram (when dimmer is off)
If the dimmer is switched off, this parameter can be used to con-
figure the behavior when switching on via object 21.
It is available:
-
No reaction
-
Dim to fix color
-
Dim to last color before switching off
Behavior on ON telegram (when dimmer is on)
If the dimmer is already switched on, this parameter can be used
to configure the behavior for a new ON telegram via object 21.
It is available:
-
No reaction
-
Dim to fix color
Color on ON telegram
With suitable parameterization this color is activated by ON tele-
gram via object 21.
Fade time on ON telegram
This fade time is active when an ON telegram is received. The
period is related to a complete dimming process of 0-100%.
Behavior on OFF telegram
This parameter describes the behavior of the dimmer when an
OFF telegram is received via object 21.
It is available:
-
No reaction
-
Dim to fix color
Color on OFF telegram
With suitable parameterization this color is activated by OFF tel-
egram via object 21.
Fade time on OFF telegram
This fade time is active when an OFF telegram is received. The
period is related to a complete dimming process of 0-100%.
Day/night switching
When using this function, the following object is visible for
switching between day/night mode:
Group Object
Type KNX
Size
Direction
GO 30 RGB A: Day/Night - Switch
1.001
1 Bit
From KNX
Day mode is triggered with an ON telegram on the object, night
mode with an OFF telegram. After a restart, the device is in day
mode.
Telegrams on object 30 affect all activated day/night
switches of the RGB channel.
In addition, it can be determined when the colors become active
after receiving a telegram on this object, it is available:
-
Disabled
-
Switch on day/night telegram
Immediately after reception of day/night switching, it is
dimmed to the active color according to the last switch-
on/switch-off received via object 21.
-
Switch on next on/off telegram
The currently active color is not used until the next
switch on/off telegram via object 21.
There is a separate switch-on and switch-off color for night mode
in the parameters, in day mode the always visible colors are
used.
Color on ON telegram (night)
If the dimmer is in night mode, this color is activated by ON tele-
gram via object 21 and appropriate parameterization.
Color on OFF telegram (night)
If the dimmer is in night mode, this color is activated by OFF tele-
gram via object 21 and appropriate parameterization.
Fade time for day/night switching
This fade time is only active if switching on day/night telegram is
used. If switching on next on/off telegram is used, the regular
fade time of the respective on or off telegram is active. The pe-
riod refers to a complete dimming process of 0-100%.
Object change Color Angle (rel.)
To change the color angle using relative dimming commands,
the following object is available, if it has been activated via pa-
rameters:
Group Object
Type KNX
Size
Direction
GO 22 RGB A: Color angle adjusting rel.
- Increase/Decrease
3.007
4 Bit
From KNX
Fade time for changing color angle
The time period is related to a complete dimming process of 0-
360°.
Object change Color Angle (abs.)