©
2019 WEINZIERL ENGINEERING GmbH
Page 12/41
The following object is used to control the brightness via dim-
ming value, if it has been activated via parameters:
Group Object
Type KNX
Size
Direction
GO 29 RGB A: Brightness dimming abs.
- Set value
5.001
1 Byte
From KNX
Minimal value for changing brightness by object
This parameter can be used to configure which minimum bright-
ness can be reached via object 29. If a value below the minimum
value is received, the dimmer is controlled with the minimum
value. If a value >0% is set here, the following parameter is also
visible:
Switch off dimmer with telegram value 0%
Here it is to select whether the dimmer is switched off when a
value of 0% is received.
Maximal value for changing brightness by object
This parameter can be used to configure the maximum bright-
ness that can be achieved via object 29. If a value above the
maximum value is received, the dimmer is controlled with the
maximum value.
Fade time while increasing brightness with object
This fade time is active when the brightness is increased by re-
ceiving values via object 29. The period is related to a complete
dimming process of 0-100%.
Fade time while decreasing brightness with object
This fade time is active when the brightness is decreased by re-
ceiving values via object 29. The period is related to a complete
dimming process of 0-100%.
F.
RGB A: Staircase function
This parameter page can be used to implement a staircase func-
tion with optional orientation light. The staircase function can be
overridden by the lock function. It has the following objects:
Group Object
Type KNX
Size
Direction
GO 11 RGB A: Staircase function - Trig-
ger
1.010
1 Bit
From KNX
GO 30 RGB A: Day/Night - Switch
1.001
1 Bit
From KNX
Day mode is triggered with an ON telegram on the object, night
mode with an OFF telegram. After a restart, the device is in day
mode.
Color on switching on the staircase function (day)
This color is used in day mode when the staircase house func-
tion is switched on by telegram to object 11.
Color on switching on the staircase function (night)
This color is used in night mode when the staircase house func-
tion is switched on by telegram to object 11.
Fade time for switching on
This fade time is active when the staircase function is switched
on by telegram to object 11. The period refers to a complete dim-
ming process of 0-100%.
Delay time for staircase function
After the delay time has elapsed, the dimmer is dimmed to the
switch-off or orientation light color, depending on the parameter
setting.
Reaction on ON telegram
This parameter determines the behavior after switching on the
staircase function via ON telegram to object 11: With the "Switch
on" setting, the channel remains switched on after ON telegram
until the delay time is started via OFF telegram. In the setting
"Switch to switch-off delay", the channel enters immediately the
delay time after the ON telegram.
Delay time retriggerable
If it is set that the delay time is started with ON telegram, this pa-
rameter determines whether only the 1. ON telegram on object
11 restarts the delay time, or also each further one.
If it is set that the delay time is started with OFF telegram, this
parameter determines whether only the 1. OFF telegram on ob-
ject 11 restarts the delay time, or also any other if the staircase
function is already in the delay time.
Orientation light after delay time
This parameter can be used to set whether the dimmer dims to
switch-off value or to orientation light at the end of the delay
time, as well as the duration of the orientation light.
It is available:
-
Disabled
-
1 s
-
2 s
-
5 s
-
10 s
-
30 s
-
1 min
-
2 min
-
5 min
-
10 min
-
20 min
-
30 min
