©
2019 WEINZIERL ENGINEERING GmbH
Page 6/41
Automatic mode
Automatic mode is only available in the "Dimmer" function. If this
mode is selected, the following objects become visible:
Group Object
Type KNX
Size
Direction
GO 41 RGB A: Automatic mode - Acti-
vate
1.001
1 Bit
From/To
KNX
GO 42 RGB A: Autom. RGB - Set value
232.600
3 Byte
From KNX
When using automatic mode, the dimmer can be controlled via
object 42, e.g. for light control or daylight-dependent basic light-
ing.
In automatic mode, the dimmer can be manually overridden by
the function blocks "Object RGB combined", "Objects colors sep-
arate" and "Objects color/saturation/brightness", as well as by
scene, slumber and sequencer function. During manual override,
values of object 42 are ignored, each manual override restarts
the fallback time.
After the fallback time set in the parameter has elapsed, the
RGB values received on object 42 are processed again.
Via object 41, the automatic can be switched on or off at any
time, it also serves as a state object for automatic mode.
Slumber function
The slumber function is only available in the "Dimmer" operating
mode. The slumber function offers 2 different fade times each for
switching on and off via object. If this function is activated, a new
parameter page appears, which is explained in section I.
Lock function
The lock function can be activated or deactivated here.
This function is available in both "Dimmer" and "Staircase func-
tion" operating modes. If this function is activated, a new param-
eter page appears for further configuration, which is explained in
Section J in more detail.
B.
RGB A: Red
RGB A: Green
RGB A: Blue
Each of the 3 individual colors red, green and blue can be con-
trolled independently with on/off telegram, relative dimming and
dimming value. The following parameters and objects are availa-
ble for each color:
Object color Red on/off
Object color Green on/off
Object color Blue on/off
For switching the single colors, the following objects are availa-
ble, if they have been activated via parameters:
Group Object
Type KNX
Size
Direction
GO 12 RGB A: Red on/off - Switch
1.001
1 Bit
From KNX
GO 15 RGB A: Green on / off - Switch
1.001
1 Bit
From KNX
GO 18 RGB A: Blue on / off - Switch
1.001
1 Bit
From KNX
Behavior on ON telegram
This parameter can be used to configure the behavior when
switching on via the respective object.
It is available:
-
No reaction
-
Dim to fix value
Value on ON telegram
With suitable parameterization this value is activated on ON tele-
gram via the respective object.
Fade time on ON telegram
This fade time is active when an ON telegram is received. The
period is related to a complete dimming process of 0-100%.
Behavior on OFF telegram
This parameter describes the behavior of the dimmer when an
OFF telegram is received via the respective object.
It is available:
-
No reaction
-
Dim to fix value
Value on OFF telegram
With suitable parameterization this value is activated on OFF tel-
egram via the respective object.
Fade time on OFF telegram
This fade time is active when an OFF telegram is received. The
period is related to a complete dimming process of 0-100%.
Day/night switching
When using this function for at least one of the 3 colors, the fol-
lowing object is visible for switching between day/night mode:
Group Object
Type KNX
Size
Direction
GO 30 RGB A: Day/Night - Switch
1.001
1 Bit
From KNX
Day mode is triggered with an ON telegram on the object, night
mode with an OFF telegram. After a restart, the device is in day
mode.
Telegrams on object 30 affect all activated day/night
switches of the RGB channel.
In addition, it can be determined when the values become active
after receiving a telegram on this object, it is available:
-
Disabled
-
Switch on day/night telegram
Immediately after reception of day/night switching, it is
dimmed to the active value according to the last re-
ceived switch-on/switch-off via object 12, 15 or 18.
-
Switch on next on/off telegram
The currently active value is not used until the next
switch on/off telegram via object 12, 15 or 18.
There is a separate switch-on and switch-off value for night
mode in the parameters, in day mode the always visible values
are used.
Value on ON telegram (night)
If the dimmer is in night mode, this value is activated by ON tele-
gram via object 12, 15 or 18 and appropriate parameterization.