©
2019 WEINZIERL ENGINEERING GmbH
Page 7/41
Value on OFF telegram (night)
If the dimmer is in night mode, this value is activated by OFF tel-
egram via object 12, 15 or 18 and appropriate parameterization.
Fade time for day/night switching
This fade time is only active if switching on day/night telegram is
used. If switching on next on/off telegram is used, the regular
fade time of the respective on or off telegram is active. The pe-
riod refers to a complete dimming process of 0-100%.
Object dimming color Red (rel.)
Object dimming color Green (rel.)
Object dimming color Blue (rel.)
The following objects are available for dimming the 3 colors us-
ing relative dimming commands, if they have been activated via
parameters:
Group Object
Type KNX
Size
Direction
GO 13 RGB A: Red dimming rel. -
Brighter/Darker
3.007
4 Bit
From KNX
GO 16 RGB A: Green dimming rel. -
Brighter/Darker
3.007
4 Bit
From KNX
GO 19 RGB A: Blue dimming rel. -
Brighter/Darker
3.007
4 Bit
From KNX
Minimal value while changing with object
This parameter can be used to set which minimum value can be
reached via relative dimming. If the current value is below the
minimum value, the brightness cannot be reduced via object 13,
16 or 19.
Maximal value while changing with object
This parameter can be used to set which maximum value can be
reached via relative dimming. If the current value is above the
maximum value, the brightness cannot be increased via object
13, 16 or 19.
Fade time while increasing brightness with object
This fade time is active when the brightness is increased via rel-
ative dimming with object 13, 16 or 19. The period refers to a
complete dimming process of 0-100%.
Fade time while decreasing brightness with object
This fade time is active when the brightness is decreased via rel-
ative dimming with object 13, 16 or 19. The period refers to a
complete dimming process of 0-100%.
Object value color Red (abs.)
Object value color Green (abs.)
Object value color Blue (abs.)
The following objects are used to control the 3 colors via the dim-
ming value if they have been activated via parameters:
Group Object
Type KNX
Size
Direction
GO 14 RGB A: Red dimming abs. - Set
value
5.001
1 Byte
From KNX
GO 17 RGB A: Green dimming abs. -
Set value
5.001
1 Byte
From KNX
GO 20 RGB A: Blue dimming abs. - Set
value
5.001
1 Byte
From KNX
Minimal value while receiving by object
This parameter can be used to configure which minimum value
can be reached via object 14, 17 or 20. If a value is received be-
low the minimum value, the color is controlled with the minimum
value. If a value >0% is set here, the following parameter is also
visible:
Process value 0 by object
Here it is to select whether the color is switched off when a value
of 0% is received.
Minimal value while changing with object
This parameter can be used to configure which maximum value
can be reached via object 14, 17 or 20. If a value above the
maximum value is received, the color is controlled with the maxi-
mum value.
Fade time while increasing brightness with object
This fade time is active when the brightness is increased by val-
ues received via object 14, 17 or 20. The period refers to a com-
plete dimming process of 0-100%.
Fade time while decreasing brightness with object
This fade time is active when the brightness is decreased by val-
ues received via object 14, 17 or 20. The period refers to a com-
plete dimming process of 0-100%.
C.
RGB A: Color
With this function block you can activate different colors via
on/off telegrams, in addition there are objects for manipulating
the color angle.
The color angle is an attribute of a color in the HSV space and
assigns an angle in a color circle to each hue.
Object Dimmer on/off