©
2019 WEINZIERL ENGINEERING GmbH
Page 19/41
The following objects are available for switching the brightness, if
they have been activated via parameters:
Group Object TW A
Type KNX
Size
Direction
GO 11 TW A: Color temperature via
brightness - Switch
1.001
1 Bit
From KNX
Group Object TW B
Type KNX
Size
Direction
GO 91 TW B: Color temperature via
brightness - Switch
1.001
1 Bit
From KNX
Behavior on ON telegram (when dimmer is off)
If the dimmer is switched off, this parameter can be used to con-
figure the behavior when switching on via the respective object.
It is available:
-
No reaction
-
Dim to fix value
-
Dim to last value before switching off
Behavior on ON telegram (when dimmer is on)
If the dimmer is already switched on, this parameter can be used
to configure the behavior for a new ON telegram via the respec-
tive object.
It is available:
-
No reaction
-
Dim to fix value
-
Dim to fix value if higher than actual
Brightness on ON telegram
This value is activated by ON telegram via the respective object
with suitable parameterization.
Fade time on ON telegram
This fade time is active when an ON telegram is received. The
period refers to a complete dimming process of 0-100%.
Behavior on OFF telegram
This parameter describes the behavior of the dimmer when an
OFF telegram is sent via the respective object.
It is available:
-
No reaction
-
Dim to fix value
Brightness on OFF telegram
This brightness is activated with suitable parameterization by
OFF telegrams via the respective object.
Behavior on 2. OFF telegram
This parameter describes the behavior of the dimmer when a 2.
OFF telegram is received via the respective object.
It is available:
-
No reaction
-
Switch off
The 2. OFF telegram must follow the 1. OFF telegram within 1
second in order to be evaluated. If the current brightness is
equal to or lower than the parameterized brightness for OFF tele-
gram, the device is already switched off by the 1. OFF telegram.
Fade time on OFF telegram
This fade time is active when an OFF telegram is received. The
period refers to a complete dimming process of 0-100%.
Day/night switching
When using this function, the following objects are visible for
switching between day/night mode:
Group Object TW A
Type KNX
Size
Direction
GO 21 TW A: Day/Night - Switch
1.001
1 Bit
From KNX
Group Object TW B
Type KNX
Size
Direction
GO 101 TW B: Day/Night - Switch
1.001
1 Bit
From KNX
Day mode is triggered with an ON telegram on the respective ob-
ject, night mode with an OFF telegram. After a restart, the device
is in day mode.
Telegrams on object 21 or 101 affect all activated
day/night switches of the TW channel.
In addition, it can be determined when the values become active
after receiving a telegram on these objects, it is available:
-
Disabled
-
Switch on day/night telegram
Immediately after reception of day/night switching, it is
dimmed to the active value according to the last
switch-on/switch-off received via object 11 or 91.
-
Switch on next on/off telegram
The currently active value is not used until the next
switch on/off telegram via object 11 or 91.
There is a separate switch-on and switch-off value for night
mode in the parameters, in day mode the always visible values
are used.
Brightness on ON telegram (night)
If the dimmer is in night mode, this value is activated by ON tele-
gram via object 11 or 91 and suitable parameterization.
Brightness on OFF telegram (night)
If the dimmer is in night mode, this value is activated by OFF tel-
egram via object 11 or 91 and suitable parameterization.
Fade time for day/night switching
This fade time is only active if switching on day/night telegram is
used. If switching on next on/off telegram is used, the regular
fade time of the respective on or off telegram is active. The pe-
riod refers to a complete dimming process of 0-100%.
Object change Brightness (rel.)
