2 | Electric motors for explosive atmospheres
EU DECLARATION OF CONFORMITY
Manufacturers:
WEG Equipamentos Elétricos S.A.
Av. Prefeito Waldemar Grubba, 3000
89256-900 - Jaraguá do Sul – SC – Brazil
www.weg.net
WEG (Nantong) Electric Motor Manufacturing CO., LTD.
No. 128# - Xinkai South Road, Nantong
Economic & Technical Development
Zone, Nantong, Jiangsu Province – China
www.weg.net/cn
WEG (Jiangsu) Electric Equipment CO., LTD.
No. 15 Group, North City Street, Dengyuan Community
Rugao City, Jiangsu Province – China
www.weg.net/cn
WEG Linhares Equipamentos Elétricos S.A.
Rod. BR 101, Km 161,5, s/n
Distrito Industrial Rio Quartel
Bairro Rio Quartel de Baixo
29915-500 – Linhares – ES – Brazil
www.weg.net
WEGeuro – Industria Electrica S.A.
Headquarters:
Rua Eng Frederico Ulrich, Apartado 6074
4476-908 – Maia – Porto – Portugal
www.weg.net/pt
Contact person: Luís Filipe Oliveira Silva Castro Araújo
Authorised Representative in the European Union
(Single Contact Point)
Branch – Santo Tirso:
Parque Industrial da Ermida
Avenida Luis Areal – Sta Cristina do Couto
4780-165 – Santo Tirso – Portugal
www.weg.net/pt
The manufacturer declares under sole responsibility that:
WEG electric motors and components used for following motor lines:
W21, W22X…, W50X…, HGF and EX61G
...............
when installed, maintained and used in applications for which they were designed, and in compliance with the relevant installation standards and
manufacturer’s instructions, comply with the provisions of the following relevant European Union harmonisation legislation, wherever applicable:
ATEX Directive 2014/34/EU
Machinery Directive 2006/42/EC***
EMC Directive 2014/30/EU
(electric motors are considered inherently benign in terms of electromagnetic compatibility)
The fulfilment of the safety objectives of the relevant European Union harmonisation legislation has been demonstrated by compliance with the
following standards, wherever applicable:
EN 60079-0:2012 + A11:2013*/ EN 60079-1:2014*/ EN 60079-7:2007**/ EN 60079-15:2010*/
EN 60079-31:2014*/ EN 60204-1:2006 + A1:2009 + AC:2010 and EN 60204-11:2000 + AC:2010
* A comparison of the current version of the EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-15:2010 and EN 60079-31:2014
standards with the previous versions used by some BASEEFA, CESI and PTB ATEX certificates shows that there are no changes in the “state of
the art” applicable to the product covered by this Declaration of Conformity. The manufacturer hereby declares that the ATEX Certificates issued by
BASEEFA, CESI and PTB meet the Essential Health and Safety Requirements of ATEX Directive 2014/34/EU.
** Electric motors evaluated under Certificates Baseefa 15 ATEX 0152X, Baseefa 15 ATEX 0237X, INERIS 14 ATEX 0001X and INERIS 16 ATEX
0036X comply with the EN or IEC 60079-7:2015 requirements.
*** Low voltage electric motors are not considered under the scope and electric motors designed for use with a voltage rating higher than 1000V are
considered partly completed machinery and are supplied with a
Declaration of Incorporation:
The products above cannot be put into service until the machinery into which they have been incorporated has been declared in conformity with the
Machinery Directive.
A Technical Documentation for the products above is compiled in accordance with part B of annex VII of Machinery Directive 2006/42/EC.
We undertake to transmit, in response to a reasoned request by the national authorities, relevant information on the partly completed machinery
identified above through WEG authorised representative established in the European Union. The method of transmission shall be electronic or
physical method and shall be without prejudice to the intellectual property rights of the manufacturer.
The Quality System for the certificates is approved by Baseefa under the Quality Assurance Notification Baseefa ATEX 5886 (WEG Equipamentos
Elétricos S.A. and WEG Linhares Equipamentos Elétricos S.A.) and Baseefa ATEX 3862 (WEGeuro – Industria Electrica S.A.).
CE marking in:
1996
Jaraguá do Sul, January 16
th
, 2017
Signed for and on behalf of the manufacturer:
Milton Oscar Castella
Engineering Director
