20
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
Tools Needed:
20
Step Ladder
Torsion Spring assembly
imPoRTaNT:
RIGhT AND LEfT hAND IS ALWAYS
DETERMINED fROM INSIDE ThE BUILDING LOOkING
OUT.
NoTe:
Identify the springs provided as either right
hand wound (red winding cone), which goes on the
LEfT hAND SIDE or left hand wound (black winding
cone), which goes on the RIGhT hAND SIDE.
facing the inside of the door, lay the torsion tube on
the floor. Lay the spring with the black color coded
winding cone and the black color coded cable drum,
at the right hand end of the tube. Lay the spring with
the red color coded winding cone and the red color
coded cable drum, at the left hand end of the tube.
NoTe:
The set screws used on all torsion
counterbalance winding cones and cable drums, are
now colored red. DO NOT identify right and left hand
by the set screw color.
Slide the nylon center bushing onto the torsion tube
followed by the springs and cable drums. The nylon
center bushing, springs and cable drums must be
positioned, as shown. With assistance, pick up the
torsion assembly and slide one end of the tube
through one end bearing bracket. Lay the torsion
tube into the center bearing bracket and slide the
other end of the tube into the opposite end bearing
bracket. Position the torsion tube so that equal
amounts of the tube extend out of each end bearing
bracket.
Left hand
cable
drum red
RIG
hT
hAND
WOUND
RED
WINDING
CONE
LEf
T h
AND
SIDE
Torsion tube
Right hand
cable drum
black
Nylon Center
bracket
bushing
LEf
T h
AND
WOUND
BLAC
k
WINDING
CONE
RIG
hT
hAND
SIDE
Left hand cable
drum red
Right hand wound
Red winding cone
Left hand side
Nylon center
bracket bushing
Torsion
tube
Left hand wound
Black winding cone
right hand side
Right hand
cable drum
black
Torsion
assembly
End bearing
bracket
Torsion
assembly
Center
bracket
Equal
spacing
