background image

covered by one or more of the following Patents; 5,408,724; 5,409,051; 5,419,010; 5,495,640; 5,522,446; 5,562,141; 5,566,740; 5,568,672; 5,718,533; 6,019,269; 6,089,304; 6,644,378; 
6,374,567; 6,561,256; 6,527,037; 6,640,872; 6,672,362; 6,725,898; 6,843,300; 6,915,573; 6,951,237; 7,014,386; 7,036,548; 7,059,380; 7,121,317; 7,128,123; 7,134,471; 7,134,472; 7,219,392; 
7,254,868. canadian: 2,384,936; 2,477,445; 2,495,175; 2,507,590; 2,530,701; 2,530,74; 2, 2,532,824. other uS and Foreign Patents pending

28

Contact your local 

W

ayne-Dalton dealer

. T

o find your local 

W

ayne-Dalton dealer

, refer to your local yello

pa

ges business listings or go to the 

Find a Dealer

 section online a

www

.wayne-dalton.com

Thank you for your purchase

Please Do Not Return This Product T

o The Store

Limited Warranty

Models 8024, 8124

 

Subject to the terms and conditions contained in this Limited Warranty, Wayne-Dalton Corp. (“Manufacturer”) warrants the sections of the door, which is 

described at the top of this page, for a period of 

TeN (10) yeaRS

 from the date of installation against:

 

(i) 

The door becoming inoperable due to rust-through of the steel skin from the core of the door section, due to cracking, splitting, or other  

 

 

deterioration of the steel skin, or due to structural failure caused by separation or degradation of the foam insulation.

 

(ii) 

Peeling of the original paint on the door as a result of a defect in the original paint or in the application of the original paint coating, in   

 

 

cases where the door sections and the original paint:  (a) have not been subjected to adverse atmospheric conditions or contaminates  

 

 

(such as salt water or other marine environment, or to toxic or abrasive substances, including those in the air);  (b) have been maintained  

 

 

in compliance with Manufacturer’s recommendations; and  (c) have not been subject to physical abrasion, impacted by a hard object,   

 

 

or punctured (including without limitation “paint rub” occurring in metal to metal contact and movement).

 
The Manufacturer warrants the factory primed and finish painted and applied Decatrim™ (wood composite overlay) of the above-described door, against defects in 
material and workmanship for a period of 

Two (2) yeaRS

 from the date of installation, provided the wood composite overlay is properly maintained according to 

Wayne-Dalton Corp.’s Wood Maintenance and Refinishing Instructions found in your Installation Instructions and Owner’s Manual. 
 

The Manufacture will not be responsible for checking, chipping, and/ or cracking of the wood composite overlay; this is not considered a defect, but an 

uncontrollable characteristic of wood composites.
 

The Manufacturer warrants the garage door hardware (except springs) and the tracks of the above-described door, for a period of 

TeN (10) yeaRS

 from 

the date of installation, against defects in material and workmanship, subject to all the terms and conditions below.
 

The Manufacturer warrants those component parts of the door not covered by the preceding provisions of this Limited Warranty against defects in mate-

rial and workmanship for a period of 

oNe (1) yeaR

 from the date of installation.

 

This Limited Warranty is extended only to the person who purchased the product and continues to own the premises (where the door is installed) as his/

her primary residence (“Buyer”).  This Limited Warranty does not apply to residences other than primary, or to commercial or industrial installations, or to installa-
tions on rental property (even when used by a tenant as a residence). This Limited Warranty is not transferable to any other person (even when the premises is sold), 
nor does it extend benefits to any other person. As a result this Limited Warranty does NOT apply to any person who purchases the product from someone other than 
an authorized Wayne-Dalton dealer or distributor.
 

The Manufacturer will not be responsible for any damage attributable to improper storage, improper installation, or any alteration of the door or its 

components, abuse, damage from corrosive fumes or substances, salt spray or saltwater air, fire, Acts of God, failure to properly maintain the door, or attempt to 
use the door, its components or related products for other than its intended purpose and its customary usage.  

 

This Limited Warranty does 

not cover ordinary wear. This Limited Warranty will be voided if the original finish is painted over, unless Manufacturer’s preparation and painting instructions are 
followed explicitly. This Limited Warranty will be voided if any holes are drilled into the door, other than those specified by the Manufacturer.
 

ThIS LIMITED WARRANTY COVERS A CONSUMER PRODUCT AS DEfINED BY ThE MAGNUSON-MOSS ACT. NO WARRANTIES, EXPRESS OR IMPLIED 

(INCLUDING BUT NOT LIMITED TO ThE WARRANTY Of MERChANTABILITY OR fITNESS fOR A PARTICULAR PURPOSE) WILL EXTEND BEYOND ThE TIME PERIOD SET 
fORTh IN 

uNDeRScoReD bolD Face TyPe

 IN ThIS LIMITED WARRANTY, ABOVE.

 

• 

Some States do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

 

Any claim under this Limited Warranty must be made in writing, within the applicable warranty period, to the dealer from which the product was pur-

chased. Unless the dealer is no longer in business, a written claim to the Manufacturer will be the same as if no claim had been made at all.
 

At the Manufacturer’s option, pursuant to the dealer having notified the Manufacturer of a warranty claim, a service representative may inspect the 

product on site, or Buyer may be required to return the product to the Manufacturer at Buyer’s expense.  Buyer agrees to cooperate with any representative of the 
Manufacturer and to give such representative full access to the product with the claimed defect and full access to the location of its installation.
 

If the Manufacturer determines that the claim is valid under the terms of this Limited Warranty, the Manufacturer will cause the defective product to be 

repaired or replaced. The decision about the manner in which the defect will be remedied will be at the discretion of the Manufacturer, subject to applicable law. ThE 
REMEDY WILL COVER ONLY MATERIAL. ThIS LIMITED WARRANTY DOES NOT COVER OThER ChARGES, SUCh AS fIELD SERVICE LABOR fOR REMOVAL, INSTALLA-
TION, PAINTING, ShIPPING, ETC.
 

Any repairs or replacements arranged by Manufacturer will be covered by (and subject to) the terms, conditions, limitations and exceptions of this Lim-

ited Warranty; provided, however, that the installation date for the repaired or replaced product will be deemed to be the date the original product was installed, and 
this Limited Warranty will expire at the same time as if there had been no defect. If a claim under this Limited Warranty is resolved in a manner other than described 
in the immediately preceding paragraph, then neither this Limited Warranty nor any other warranty from the Manufacturer will cover the repaired or replaced portion 
of the product.
 

ThE REMEDIES fOR ThE BUYER DESCRIBED IN ThIS LIMITED WARRANTY ARE EXCLUSIVE and take the place of any other remedy.  

 

 

The liability of the Manufacturer, whether in contract or tort, under warranty, product liability, or otherwise, will not go beyond the Manufacturer’s obligation to repair 
or replace, at its option, as described above. ThE MANUfACTURER WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE fOR SPECIAL, INCIDENTAL, OR CONSEqUEN-
TIAL DAMAGES, including (but not limited to) damage or loss of other property or equipment, personal injury, loss of profits or revenues, business or service interrup-
tions, cost of capital , cost of purchase or replacement of other goods, or claims of third parties for any of the foregoing. 
 

• 

Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not  

 

 

apply to you.

 

No employee, distributor, dealer, representative, or other person has the authority to modify any term or condition contained in this    

Limited Warranty or to grant any other warranty on behalf of or binding on the Manufacturer, and anyone’s attempt to do so will be null and void.
 

Buyer should be prepared to verify the date of installation to the satisfaction of the Manufacturer.

 

The rights and obligations of the Manufacturer and Buyer under this Limited Warranty will be governed by the laws of the State of Ohio, USA, to the 

extent permitted by law.
 

• 

This Limited Warranty gives you specific legal rights and you may also have other rights, which may vary from State to State.

Summary of Contents for 8124





























Reviews: