4
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
5/16” x 2” tamper-resistant hex head Lag
Screws (as required)
(2) 1/4”- 20 hex
nuts
1/4”- 20 flange hex nuts
(as required)
(2) 3/8”- 16
hex nuts
(2) 1/4” x 2- 1/2” carriage bolts
Package contents continued...
(2) 1/4” x 2-3/4” carriage bolts
5/16”- 18 hex nuts
(as required)
1/4”- 20 x 9/16” track Bolts
(as required)
5/16” x 1 5/8” hex head lag screws
(as required)
5/16” x 1 5/8” tamper resistant Lag Screw
(as required)
(2) 3/8” - 16 x 3/4”
Truss head bolts
1/4” - 14 x 7/8” Self drilling
screws (as required)
(2) 1/4”- 20 X 5/8” Tamper
resistant screws
(2) 3/8”- 16 x 1-1/2” hex head
Bolts
BOTTOM SECTION
Warning label
INTERMEDIATE I SECTION
Door Section identification
Door Height
Bottom
Lock (second)
Intermediate (third)
Intermediate II (fourth)
Top
6’0”
18”
18”
18”
NA
18”
6’6”
21”
18”
18”
NA
21”
7’0”
21”
21”
21”
NA
21”
7’6”
18”
18”
18”
18”
18”
8’0”
21”
18”
18”
18”
21”
When installing your door you must use sections of the appropri-
ate height in the right stacking order. What sections heights you
need to use in what order depends on the height of your door.
Unless your door is five sections in height, you will not receive an
Intermediate II section.
The
boTTom SecTioN
can be identified by the factory attached
bottom astragal and by the bottom bracket warning labels on
each end stile.
The
iNTeRmeDiaTe i SecTioN
may have a warning label
attached to either right or left hand endstile of the section. This
section is always the 3rd section from the bottom of the door.
Bottom Bracket warning
Labels
Astragal
(2) Clevis pins
(2) Cotter pins
(2) 5/16” Washers
18” OR
21”
