![background image](http://html1.mh-extra.com/html/wayne-dalton/8124/8124_installation-instructions-and-owners-manual_3975075005.webp)
5
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
PR
e-
iNST
alla
Tio
N
PR
e-
iNST
alla
Tio
N
Tools Required
Safety Glasses
flat Tip Screwdriver
1/4”, 3/8”, 7/16”, 1/2” &
9/16” Wrenches
7/16”, 1/2” & 9/16”
Socket
Phillips head Screw-
driver
ratchet Wrench
Power drill
sawhorse
gloves
3/8”, 7/16” socket driver
hammer
vice grips
Step Ladder
Tape Measure
level
vice clamps
pencil
9/32”, 1/2”, 3/16” & 1/8” drill
bits
Approved Winding Bars
1/4” torx bit
Removing an old Door
imPoRTaNT:
COUNTERBALANCE SPRING TENSION MUST ALWAYS BE RELEASED BEfORE ANY ATTEMPT IS MADE TO START REMOVING AN EXISTING DOOR.
A POWERfUL SPRING RELEASING ITS ENERGY SUDDENLY CAN CAUSE SEVERE OR fATAL INjURY. TO AVOID INjURY hAVE A TRAINED DOOR SYSTEMS TEChNICIAN, USING
PROPER TOOLS AND INSTRUCTIONS, RELEASE ThE SPRING TENSION.
for detailed information see supplemental instructions “Removing an Existing Door /Preparing the Opening”. These instructions are available at no charge from Wayne-
Dalton Corp., P.O. Box 67, Mt. hope, Oh 44660, or at www.wayne-dalton.com.
waRNiNg