WAVE EXCITE CLASS & TREND, Service Maintenance Manual

Page: 192 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 9.40
B. To tune and memorise Analogue TV channels, proceed as follow
1. Press ANALOGUE SEARCH. In this phase, a temporary list of TV
channels found, will be stored and visualized in
column 1
.
2. Wait the search stops or stop it by pressing STOP SEARCH key. The
channels found in the meantime can be memorised.
3. Use the keys under the list of channels in
column 1
, to scroll
through the pages with the channels found during the search, while use
the keys under the list of numbers in
column 2
, to scroll
through the pages with the numbers and names associated to the channels.
4.
Select the channel frequency between the ones visualized in
column 1
(it
will be displayed), then press the number that you want to associate it
with, in
column 2
.
5.
An alphanumeric keypad is displayed, to associate a name to the
memorised channel.
6.
Press the ENTER (
↵
) key: the keypad will disappear and the name will
be displayed next to the number.
If a channel has already been memorised under that number, the
old channel will be overwritten with the new one.
7. Repeat the procedure above for each channel you want to memorise.
8.
In this way the channels will remain in the memory until the equipment is
switched off (
RAM memory
); to permanently memorise the changes (
in
EPROM
) press SAVE IN EPROM key.
9.
Exit with “HOME” key.
To transfer TV channels tuning data from
a machine to another one, please refer to paragraph
9.8. “Transferring the tuning data”
WARNING: If there are problems with the digital signal reception, check the aerial
antenna connection.