WAVE EXCITE CLASS & TREND, Service Maintenance Manual

Page: 128 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 7.28
Figure 7.13-3
Be carefully to reinsert the plastic
spacer (c) on the ball joints, in the same
position.
Figure 7.13-4
5. Back off the fixing lever screw, using a
ratchet wrench and a 17mm socket wrench
and remove the two washers, as shown in the
figure at the side.
During the reassembly, lock down the
screws using a torque wrench setting of
15Nm/11.1ft.lbf.
Figure 7.13-5
6. Remove the lever
(d)
from the pin on the
frame, highlighted in the figure.
Continued on following page
→