WAVE EXCITE CLASS & TREND, Service Maintenance Manual

Page: 37 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 3.5
3.1.3.3. LCD Inverter
This device powers the LCD Display lamps. It receives DC power supplies (12 Vdc supply and 3.3
Vdc enable signal) from the CPU Board, and generates the AC voltage (380 Vac) needed to power
the LCD.
3.1.3.4. Touch screen interface board
This is the board that controls the 4-wire resistive Touch Screen and interfaces the Touch Screen to
the CPU Board.
3.1.3.5. AUX input board
It is the circuit Board which allows audio and video external sources to be displayed on the LCD
base band. The board manages also the functions of the CSafe Board, detailed in the following
pages, and provides 3 RC connectors and the RJ45 connector for the CSafe communication.
3.1.3.6. iPod docking station
It is the device that allows to plug & store iPod models, in a safe docking station and to control it
from the ACTIVE Wellness TV interface.
With the docking station, developed for the full compatibility with iPod, it is possible to power,
recharge and fully control it from the touch screen of the machine.
In the following table, all the compatible iPod models:
iPod 1st gen. iPod 5st gen. iPod Classic iPod mini
iPod Nano iPod Nano:3G+4G iPod Touch: 1G+2G iPhone
3.1.3.7. Headphone jack
The machine display has one jack for connecting headphones. The jack is connected on a stereo
output of the CPU Board.
3.1.4. CS
AFE BOARD
This board makes available a communication port, on 1 externally accessible connector, which can
be used for interfacing compatible CSafe devices such as the CardioTheater readers. This connector
is situated on the back of the display.
On Wellness TV models these functions are carried out by the AUX Input Board.
These connectors can also be interfaced, using a special cable, to an external PC for programming
the FLASH EEPROM.