WAVE EXCITE CLASS & TREND, Service Maintenance Manual

Page: 118 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 7.18
Figure 7.7-4
7. Back off the screw
(e)
on both side of the
machine, using a 5mm hexagonal wrench.
8.
Pull out the central guard from the top.
Figure 7.7-5
9. Remove the sweat protection guard
(e1)
if
necessary.
Figure 7.7-6
10. Overturn the machine on one side and back
off the 4 nuts
(f)
using a 17mm wrench.
11.
Place the machine in usage position and pull
out the rear guard assembly from the top.
During reassembly, lock down the
screws (f) using a torque wrench setting
of 27Nm/20ft.lbf.
To reassemble the guards, carry out the above
steps in reverse order.