WAVE EXCITE CLASS & TREND, Service Maintenance Manual

Page: 142 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 7.42
7.21. DISASSEMBLING THE PLATFORMS
Figure 7.21-1
Carry out the operations described in paragraph
7.7. “Disassembling the guards” for removing
the front guards.
To disassemble the front platform:
1.
Turn the machine over on one side, resting
the frame on a box to keep the platform
raised off the ground.
2.
Back off the 5 screws
(a)
using a medium
Phillips screwdriver and remove the 2
covering plates
(b)
.
3.
Remove the front platform, pulling it out
from the top.
Pay attention during reassembly not to
crush the cables which goes to the power
entry module.
Figure 7.21-2
To disassemble the bottom guard of the rear
platform:
1.
Turn the machine over on one side:
2.
Back off the 4 screws
(c)
, using a 5mm
hexagonal wrench and remove the bottom
guard.
To reassemble the platforms, carry out the above
steps in reverse order
.