Watlow EZ-ZONE
®
RMC Module
•
31
•
Chapter 2 Install and Wire
Note:
When connecting the USB converter to the PC it is suggested that the Latency Timer be changed from the de-
fault of 16 msec to 1 msec. Failure to make this change may cause communication loss between the PC running
ZE-ZONE Configurator software and the control.
To modify Latency Timer settings follow the steps below:
1. Navigate to Device Manager.
2. Double click on Ports.
3. Right click on the USB serial port in use and select Properties.
4. Click the tab labeled Port settings and then click the Advance button.
