Watlow EZ-ZONE
®
RMC Module
•
222
•
Chapter 8 Appendix
Declaration of Conformity
EZ Zone Series RM
WATLOW
an
ISO 9001
approved facility since 1996.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following Series RM (Rail Mount) products:
Model Numbers:
RM
followed by additional letters or numbers describing use of up to four module
options of various inputs and outputs or communications.
Classification:
Temperature control, Installation Category II, Pollution degree 2
Voltage and Frequency:
SELV 24 to 28 V
�
ac 50/60 Hz or dc
Power Consumption:
RMA models 4 Watts, any other RM model 7 Watts
Environmental Rating:
IP20
Meet the essential requirements of the following European Union Directives by using the relevant standards show
below to indicate compliance.
2004/108/EC Electromagnetic Compatibility Directive
EN 61326-1
2006
Electrical equipment for measurement, control and laboratory
use – EMC requirements, Industrial Immunity, Class A
Emissions (Not for use in a Class B environment without
additional filtering).
EN 61000-4-2
1996 A1, A2, 2001
Electrostatic Discharge Immunity
EN 61000-4-3
2006
Radiated Field Immunity
EN 61000-4-4
2004
Electrical Fast-Transient / Burst Immunity
EN 61000-4-5
2006
Surge Immunity
EN 61000-4-6
1996 A1, A2, A3, 2005 Conducted Immunity
EN 61000-4-11 2004
Voltage Dips, Short Interruptions and Voltage Variations Immunity
EN 61000-3-2
2005
Harmonic Current Emissions
EN 61000-3-3
2
2005
Voltage Fluctuations and Flicker
SEMI F47
2000
Specification for Semiconductor Sag Immunity Figure R1-1
2
NOTE 1: To comply with flicker requirements cycle time may need to be up to 160 seconds if load
current is at 15A, or the maximum source impedance needs to be < 0.13
. Control power input of RM
models comply with 61000-3-3 requirements.
2006/95/EC Low-Voltage Directive
EN 61010-1
2001
Safety Requirements of electrical equipment for measurement,
control and laboratory use. Part 1: General requirements
Compliant with 2002/95/EC RoHS Directive
Per 2002/96/EC W.E.E.E Directive
Please Recycle Properly
Raymond D. Feller III
Winona, Minnesota, USA
March 2010
Name of Authorized Representative
Place of Issue
Date of Issue
General Manager
Title of Authorized Representative
Signature of Authorized Representative
