5.
Connect the data/power cable to the PSPI connector on the rear of the µSample manager,
and use a screwdriver to firmly tighten the connector screws.
Figure 3–41: Source connections to mass spectrometer:
Data/power cable to PSPI µSample manager
High-voltage cable
Options cable
6.
Connect the high-voltage cable (white) to the high-voltage supply outlet on the mass
spectrometer.
7.
Connect the options cable (blue) to the options port on the mass spectrometer.
8.
Identify the three fluid lines by the part numbers printed on their shrink-wrap tubing.
Table 3–2: ionKey tubing assemblies:
Part Number
Order Number
Description
430004188
700010399
Inlet tube
430004190
700010400
Infusion tube
430004212
700010401
Waste tube
430004476
700010470
Optional, post-column addition tube
June 9, 2016, 715004990 Rev. A
Page 86
