PEEK fitting
4.
Remove the probe assembly.
Warning:
To avoid spreading contamination, dispose of all waste materials according to
local environmental regulations.
5.
Dispose of the probe assembly in accordance with local environmental regulations.
6.
To install a new probe assembly, see
.
4.17 Replacing the ESI probe tip and gasket
Replace the ESI probe tip if a blockage occurs in the internal metal sheathing through which the
stainless steel capillary passes or if the probe tip is damaged.
4.17.1 Removing the ESI probe tip and gasket
Required materials
• Chemical-resistant, powder-free gloves
• 7-mm open-end wrench
• 10-mm open-end wrench
June 9, 2016, 715004990 Rev. A
Page 139
