4.19 Replacing the APCI probe heater
Replace the APCI probe heater it fails to heat the probe.
4.19.1 Removing the APCI probe heater
Required materials
Chemical-resistant, powder-free gloves
To remove the APCI probe heater:
Warning:
To avoid burn injuries, take great care while working with the probe and
source; these components can be hot.
Warning:
To avoid personal contamination with biohazards, toxic materials, and corrosive
materials, wear chemical-resistant gloves when performing this procedure.
1.
Remove the probe adaptor from the source (see
Figure 4–41:
Probe heater
June 9, 2016, 715004990 Rev. A
Page 143
