xiv
Waters products carry a safety label from an NRTL to show compliance. The
particular safety standard with which Waters complies is UL 61010A-1:
Electrical equipment for laboratory use; Part 1: General Requirements.
Canada – spectrum management
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003.
Waters products meet the safety requirements for laboratory instruments set
forth by the Standards Council of Canada. All products are evaluated by an
approved laboratory to meet Canada’s safety requirements. Waters
instruments carry a safety label from an approved testing laboratory to show
compliance. The particular Canadian safety standard with which Waters
complies is CAN/CAS-C22.2 No. 1010.1: Safety requirements for electrical
equipment for measurement, control and laboratory use, Part 1: General
Requirements.
Europe – safety and electromagnetic compatibility
Waters products have been tested to meet the safety and electromagnetic
requirements of the European community. Display of the CE mark indicates
compliance to these requirements. The safety requirements are set forth via
the standard EN61010: Safety requirements for electrical equipment for
measurement, control, and laboratory use – Part 1: General requirements.
The EMC requirements are supported in the standard EN61326: Electrical
equipment for the measurement, control, and laboratory use – EMC
requirements. Compliance to the EN61010 standard ensures the safety of the
operator from any hazardous situations that could have been caused by the
instrument. Adherence to the EMC standard guarantees that the instrument
will not cause interference to adjacent electronic products nor will other
electronic units interfere with its operation.
Australia – emissions requirements
Australian authorities require that instruments do not exceed specified
radiation limits. These radiation limits are given in the standard AS/NZS
2064: Limits and methods of measurement of electronic disturbance
characteristics of industrial, scientific and medical (ISM) radio frequency
equipment. Conformance to this standard is shown by displaying the
Australian C-tick mark.
Summary of Contents for nanoACQUITY UPLC
Page 7: ...vii ...
Page 16: ...xvi ...
Page 20: ...xx Table of Contents ...
Page 32: ...1 12 System Overview ...
