VSCOM NetCom Plus 111, User Manual

Page: 69 / 133

6 Configure the Operation Modes
Even non-technical users can process and manage the viaVPN solution with just a few mouse-clicks,
which lets you build up your cloud-based support team without incurring elevated costs or long
waiting times.
ServerConfig
+--------------------+
|
Parameter |
| Wireless |
| OpenVPN |
| ViaVPN |
| Modbus GPIO |
| Authentification |
| Date & Time |
| Info |
+--------------------+
viaVPN Parameter
Proxy IP Address [0.0.0.0]
Proxy TCP Port [8080 ]
Proxy User Name [ ]
Proxy Password [ ]
DHCP Server Enabled
IP Address [10.0.10.1]
Netmask [255.255.255.0]
Broadcast [10.0.10.255]
Range Start [10.0.10.100]
Range End [10.0.10.200]
Figure 66: viaVPN Network Parameter
The first parameters are to configure the access of NetCom Plus to the Internet, so it can establish
the connection to the Rendezvous Server. Many installations do not require configuration at all,
then there is no need for special parameters. But in case such is required, the NetCom
+
uses a web
proxy for https access, in the same way as any Internet Browser in the network does this.
The
Proxy IP Address
is either the address or the name (like proxy.network.local). The value of
0.0.0.0
disables this function, which is the default. The
Proxy TCP Port
is used to get access
to the proxy function. In rare configurations the operation of the Proxy requires an identification,
the
Proxy User Name
and the
Proxy Password
serve for this. Your Network Administrator will
provide you with all necessary values.
September 2016 NetCom Plus User Manual 69