4 Windows Virtual COM Driver
Figure 24: Define NetCom
+
s IP Configuration
This panel opens. Deselect the Option of
Use DHCP
, and place your parameters as
IP address
,
Netmask
and
Broadcast
. Click on the
OK
button. You may also enter a
DNS
name instead of the
IP Address.
Figure 25: DNS Name for NetCom
+
Server
Click the
DNS
button, and enter the Qualified Domain Name defining the NetCom
+
Server. Your
Administrator will provide you with it. This name is translated to an IP Address and used by the
driver.
When all parameters of the configuration are set, click the
OK
button. This will update the config-
uration of the NetCom
+
, the new parameters are sent to the device.
September 2016
NetCom Plus User Manual
34
Summary of Contents for NetCom Plus 111
Page 133: ......
