5 Configure with NetCom Manager
If address or netmask are changed, the NetCom Manager calculates a matching address for
Broadcast
.
You may also change this address. The DHCP option will also configure the
Default gateway
and
the
Name server
. Without DHCP you must enter these parameters by yourself, enter 0.0.0.0 if they
are not used.
5.3 NetCom Server Settings – Ports
The
Ports
panel lists all serial ports of a NetCom
+
. Some of the options are driver related, e.g.
the
Com Number
. Each serial port may operate via two TCP ports.
Figure 52: NetCom Manager Server Settings - Ports
The
TCP Control Port
is used in the Virtual Com Driver mode, and also in Null-Modem Tunnel.
If Driver mode is not desired, this parameter is ignored almost always.
The
TCP Data Port
is used to transmit data to and from the serial port. Use the default, or change
the value to the settings required for your network.
There is also a
UDP Data Port
, used in packet data transfer. You can not switch the NetCom
+
to UDP mode with the Manager. But if it is already in this mode, you can change this basic
parameter.
September 2016
NetCom Plus User Manual
53
Summary of Contents for NetCom Plus 111
Page 133: ......
