6 Configure the Operation Modes
6.2.1.1 Server Info
Web: menu “SERVER CONFIGURATION”, section “Server Info”.
Telnet: “ServerConfig”, option “Info”
ServerConfig
+--------------------+
|
Parameter
|
|
Wireless
|
|
OpenVPN
|
|
Modbus GPIO
|
|
Authentification
|
|
Date & Time
|
|
Info
|
+--------------------+
Server Info
Server Type
Plus 113
Software Version
3.3.1
Hardware Version
3.1
Serial Nr.
0650100420
UpTime
0 day(s) 00:00:40
Contact
[<unset> ]
Location
[<unset> ]
Figure 60: Server Information
Information about the selected NetCom
+
is displayed as “Server Info”. Starting with the
Server Type
,
this is the model of the NetCom
+
, followed by the
Software Version
and
Hardware Version
. This
will give a rough overview, which features are implemented, or need an upgrade of the firmware.
The
Serial Nr.
is important to identify the device you are configuring right now. For further
information the
UpTime
is listed.
Contact
and
Location
are user-defined information. They may later help to find the device in the
installation, and the person responsible for management. The Administrator may provide some
contact information here.
Contact
defines a person to contact for help, e.g. "
Mrs.
Jane Doe, 555-HELP
".
Location
is
the physical place of the NetCom
+
, e.g. "
CeBIT Hall 12, Service Box IX.a
". These data are
restricted to ASCII characters.
6.2.1.2 Server Parameter
Web: menu “SERVER CONFIGURATION”, section “Server Parameter”.
Telnet: “ServerConfig”, option “Parameter”
The
Server Parameter
allow configuration of the NetCom
+
s name and of course all parameters in
IP-settings. The
Server Name
is used as general information, e.g. in the NetCom Manager program.
On a NetCom Plus with WLAN option you may choose the network
Interface Priority
as
Cable
,
Wireless
or both (priority
Cable
,
Wireless
or
Wireless
,
Cable
).
September 2016
NetCom Plus User Manual
63
Summary of Contents for NetCom Plus 111
Page 133: ......
